ชุดแยกน้ำกับน้ำมัน

ชุดแยกน้ำกับน้ำมัน

The condensate formed in compressed air systems is usually contaminated with oil and other pollutants. It has to be drained from the air system to protect tools, equipment and finished product – not only that, but there’s a lot more condensate than most people realise.

For instance, an 18kW compressor running 24/7 for a year can produce 10,000 litres of oil-contaminated water, which presents a major disposal problem. Even though it contains only a few litres of oil in total, its disposal to any drain without treatment is illegal. Given that over 95% of the condensate is water, removal by a waste contractor would seem to be an unnecessary ongoing expense.

SEPURA Technologies Ltd provide the perfect solution to the problem of what to do with compressor condensate from any size of compressed air system.

According to our tests, the SEPURA oil/water separator outperforms anything else available. SEPURA is the most reliable separator; it’s the simplest to select, install, use and maintain; yet it offers a market-leading outlet quality of better than 10mg per litre (10 p.p.m.) for up to 4000 hours of filter life.

This means that at the end of its 4000-hour life a STERLING filter in a SEPURA oil/water separator should be providing discharge quality that’s twice as good as the 20p.p.m. limit that most authorities will accept into their foul drains/sewers.

It should be remembered that no oil-contaminated waste should be discharged to storm drains, water courses or ground drainage.

SEPURA oil/water separators are warranted for 10 years, and provided the equipment is selected, installed and maintained correctly, we also indemnify the end user to the value of any fine incurred as a result of non-performance of the separator.

Guaranteed Performance
The SEPURA range of condensate cleaners employs a specially designed filter set to avoid using the troublesome weir, which is found in many traditional separators. Similarly, it has nei-ther condensate settlement tank nor separate oil container.

In SEPURA, waste oil is trapped only in the filters, so handling is quick and easy. At service time, simply dispose of the old filters and replace them. There is no need to deal separately with the collected oil or untreated condensate from the set-tlement tank—because there isn’t any!

SEPURA’s design makes it tolerant of any type of condensate drain. In turn, this means quick and easy low-cost installation. However, we do recommend the use of our ‘ECD’ zero-loss drains to maximise energy savings.

Simplicity of design offers economies right across the board, from initial purchase to cost of ownership. SEPURA is also more environmentally friendly, using fewer resources and less energy to make than more complex and expensive designs.

Sterling filters are much less energy-hungry to manufacture than carbon, and are made mostly from recycled materials With such a simple, risk-free product, it’s no wonder SEPURA can offer you a no-quibble guarantee and a 10-year warranty.

Note
Due to continuous improvements, the specifications are subject to change without prior notice